Citizen CT-P29 Series, Справочник по командам

Страница: 122 / 428

- 121 -
[The specification which depend on the model]
CT-S280 / CT-S281 / CT-P29x series
• Bit 2 of the 1st byte (printer information) of the status sent in 4 bytes is set to 00H because
drawer is not supported.
CT-S281
• Bit 0, 1 of the 3rd byte (Paper Sensor information) is set to 00H, if the Paper-end detector is uninstalled, or if
MSW2-8= 0.
• Bit 2, 3 of the 3
rd
byte (Paper Sensor information): When cover is open, paper end may be detected as well.
CT-P29x series / CT-S310 II
• Bit 0, 1 of the 3
rd
byte (Paper Sensor information): Bit is fixed at 0 due to no paper near end function.
(1) 1st byte (Printer information)
Bit Status Hex. Decimal
0
Unused
00H 0
1
Unused
00H 0
2
Status of pin 3 of drawer kick-out connector = “L”
00H 0
Status of pin 3 of drawer kick-out connector = “H”
04H 4
3
Online status
00H 0
Offline status
08H 8
4
Unused
10H 16
5
Cover closed
00H 0
Cover open
20H 32
6
Not in paper feed state triggered by FEED switch
00H 0
In paper feed state triggered by FEED switch
40H 64
7
Unused
00H 0