Citizen CT-P29 Series, Справочник по командам

Страница: 129 / 428

- 128 -
2.2.9 Panel Switch Commands
ESC c 5 n
Support model
CT-S280 CT-S300 CT-S2000 CT-S4000 CT-S251
CT-S281 CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310 II
[Function] Enabling/disabling the panel switches
[Code]
<1B>H<63>H<35>H<n>
[Range] 0≤n≤255
[Outline] [The specification which is common to the model]
• Enabling/disabling the FEED switch.
• “n” is valid only for the lowest bit (n0).
• Control by the lowest bit (n0) is shown as follows:
n0 Condition
0
FEED switch (LF-SW signal) valid
1
FEED switch (LF-SW signal) invalid
[Caution] [The specification which is common to the model]
• When the FEED switch is disabled with this command, the paper cannot be fed by operating the
FEED switch.
• While switch operation is waited at the execution of macro, the FEED switch is always enabled regardless of
the setting of this command but no paper feed operation is carried out.
[Default] n=0
CT-S801(II) / CT-S851(II)
• MSW3-2 OFF: n=0
• MSW3-2 ON : n=1
[Sample Program]
LPRINT CHR$(&H1B);"c5";CHR$(0); ----- When enabling the FEED switch
LPRINT CHR$(&H1B);"c5";CHR$(1); ----- When disabling the FEED switch