Cissell FFCD, Руководство пользователя

Страница: 20 / 33

Page 20
INSTALLATION
CISSELL WATER-SPRAY GUNS
Install the Water-Spray Gun either to the water supply line or steam return line as shown in illustration.
Before connecting water hose assembly to spray gun valve, open valve and allow water to run freely
to flush sediment from line or condenser.
Check hose connection to valve and gun and see that SG25 Gaskets are in place. Also, see that
strainer is properly installed in hose connection of gun.
The Cissell Water-Spray gun will operate on any pressure from 40 to 100 lbs. without adjustment. It
may be connected to a water supply line, or to a Cissell Steam Condenser installed on the pressure
side of a steam trap in the steam return line.
When the City water pressure is less than 40 pounds, the Cissell Steam Condenser must be used.
Recommended operating pressure, 70 pounds.