Cissell FFCD, Руководство пользователя

Страница: 15 / 33

Page 15
TO ADJUST STEAM VALVE AND SOLENOID LINKAGE---
1. Set steam valve extension bar and solenoid lever at approximately 90
o
as shown and tighten
solenoid lever set screw.
2. With solenoid lever against the rubber bumper, adjust steam valve adjusting nuts until 1/32” to 1/
16” gap is obtained. Lock the two adjusting nuts tightly together.
3. With solenoid energized (or manually held closed so that solenoid armature
gap=0”) set the push rod gap at 1/16”. Tighten the lock nut against the push rod end.
PRESSURE CONTROL ADJUSTMENT
With damper closed (blower motor not running) set the pressure control lever on top of the
blower enclosure to minimum air. Loosen the damper wire swivel set screw, position the pressure
controll plate so that the pressure plate lug is
touching the damper arm, and tighten the damper wire swivel set screw firmly
onto the damper wire.
(See drawings on other side)