1
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
7
Getting Started
This chapter provides an introduction to the Wireless Access Point (WAP) devices
web-based configuration utility, and includes these topics:
•
Starting the Web-Based Configuration Utility
•
Using the Access Point Setup Wizard
•
Getting Started
•
Window Navigation
Starting the Web-Based Configuration Utility
This section describes system requirements and how to navigate the web-based
configuration utility.
Supported Browsers
•
Internet Explorer 7.0 or later
•
Chrome 5.0 or later
•
Firefox 3.0 or later
•
Safari 3.0 or later
Browser Restrictions
•
If you are using Internet Explorer 6, you cannot directly use an IPv6 address
to access the WAP device. You can, however, use the Domain Name System
(DNS) server to create a domain name that contains the IPv6 address, and
then use that domain name in the address bar in place of the IPv6 address.
•
When using Internet Explorer 8, you can configure security settings from
Internet Explorer. Select
Tools > Internet Options
and then select the
Security
tab. Select
Local Intranet
and select
Sites
. Select
Advanced
and
then select
Add
. Add the intranet address of the WAP device (http://
<ip-
