Getting Started
Using the Access Point Setup Wizard
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
10
1
STEP 6
Select your time zone, and then set the system time manually or set up the WAP
device to get its time from an NTP server. For a description of these options, see
Time Settings
.
STEP 7
Click
Next
. The Enable Security - Set Password window appears.
STEP 8
Enter a
New Password
and enter it again in the
Confirm Password
text box. For
more information about passwords, see
User Accounts
.
NOTE
You can uncheck the Password Complexity box if you wish to disable
the password security rules. However, we strongly recommend keeping the
password security rules enabled.
STEP 9
Click
Next
. The Enable Security - Name Your Wireless Network window appears.
STEP 10
Enter a
Network Name
. This name serves as the SSID for the default wireless
network.
STEP 11
Click
Next
. The Enable Security - Secure Your Wireless Network window appears.
STEP 12
Choose a security encryption type and enter a security key. For a description of
these options, see
System Security
.
STEP 13
Click
Next
. The Wizard displays the Enable Security- Assign the VLAN ID For Your
Wireless Network window.
STEP 14
Enter a VLAN ID for traffic received on the wireless network.
It is suggested that you assign a different VLAN ID from the default (1) to wireless
traffic, in order to segregate it from management traffic on VLAN 1.
STEP 15
Click
Next
.
For the WAP121 device, the Wizard displays the Summary - Confirm Your Settings
window. Skip to
STEP 24
.
For the WAP321 device, the Wizard displays the Enable Captive Portal - Create
Your Guest Network window.
STEP 16
Select whether or not to set up an authentication method for guests on your
network (WAP321 only), and click
Next
.
If you click
No
, skip to
STEP 24
.
If you click
Yes
, the Wizard displays the Enable Captive Portal - Name Your Guest
Network window.
STEP 17
Specify a
Guest Network Name
.
