Administration
Reboot
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
48
3
STEP 1
Select
Administration
>
Copy/Save Configuration
in the navigation pane.
STEP 2
Select the
Source File Name
:
•
Startup Configuration
—Configuration file type used when the WAP device
last booted. This does not include any configuration changes applied but not
yet saved to the WAP device.
•
Backup Configuration
—Backup configuration file type saved on the WAP
device.
•
Mirror Configuration
—If the Startup Configuration is not modified for at
least 24 hours, it is automatically saved to a Mirror Configuration file. The
Mirror Configuration file is a snapshot of a past Startup Configuration. The
Mirror Configuration is preserved across factory resets, so it can be used to
recover a system configuration after a factory reset by copying the Mirror
Configuration to the Startup Configuration.
STEP 3
For the
Destination File Name
, select the file type to be replaced with the file you
are copying.
STEP 4
Click
Save
to begin the copy process.
When complete, a window shows the message, Copy Operation Successful.
Reboot
You can use the Reboot page reboot the WAP device.
STEP 1
To reboot the WAP, select
Administration
>
Reboot
in the navigation pane.
STEP 2
Select one of these options:
•
Reboot
—Reboots the WAP using Startup Configuration.
•
Reboot to Factory Default
—Reboots the WAP using the factory default
configuration file. Any customized settings are lost.
A window appears to enable you to confirm or cancel the reboot. The current
management session might be terminated.
STEP 3
Click
OK
to reboot.
