------------------------------------------------
Capability codes:
(R) Router, (B) Bridge, (T) Telephone, (C) DOCSIS Cable Device
(W) WLAN Access Point, (P) Repeater, (S) Station, (O) Other
Local Controller:
fortyGigECtrlr0/0/0/7
Source MAC Address:
0010.9400.0001
Chassis ID:
192.85.1.3
Port ID:
0010.9400.0001
Port Description:
Spirent Port
System Name:
not advertised
System Description:
Spirent Test Center
Hold Time(TTL):
99 seconds
System Capabilities:
N/A
Enabled Capabilities: N/A
Management Address:
not advertised
LLDP Packet Drop
FALSE
enabled:
RX LLDP Packet
88
Count:
RP/0/RP0/CP0:
ios#
Using Trail Trace Identifier
A Trail Trace Identifier (TTI) is used for verifying the optical connection on the trunk side.
Use the following procedure to configure and verify the TTI.
Step 1
controller coherentDSP R/S/I/P tti
{
sent
|
expected
}
ascii string
Configures the transmit and expected TTI strings. The ASCII text string can be a maximum of 64 characters. The TTI
string has to be configured on both the trunk ports that are inter-connected to each other. If a pattern mismatch occurs, a
TIM alarm is raised.
Source Access Point Identifier (SAPI), Destination Access Point Identifier (DAPI), and operator inputs are not
supported.
Note
Example:
RP/0/RP0/CPU0:ios(config)#
controller coherentDSP 0/0/0/12 tti sent ascii abc
RP/0/RP0/CPU0:ios(config)#
controller coherentDSP 0/0/0/12 tti expected ascii abc
Troubleshooting Guide for Cisco NCS 1002, IOS XR Release 6.3.x
21
General Troubleshooting
Using Trail Trace Identifier
Содержание NCS 1002
Страница 4: ......
Страница 10: ...Troubleshooting Guide for Cisco NCS 1002 IOS XR Release 6 3 x x Contents ...
