Cisco NCS 1002 Скачать руководство пользователя страница 74

Страница: 74 / 86

Logical Objects: Power

The PATCH-PANEL POWER REDUNDANCY LOST alarm is raised when one of the power supply units
present in the breakout patch-panel is not functional.

Clear the PATCH-PANEL POWER REDUNDANCY LOST Alarm

The alarm clears when the power supply unit is restored.

If the alarm does not get cleared, you need to report a Service-Affecting (SA) problem. Log into the Technical
Support Website at

http://www.cisco.com/c/en/us/support/index.html

for more information or log into

http://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html

to obtain a directory of toll-free

Technical Support numbers for your country.

PEM-MODULE-INSERT Alarm

Default Severity: Minor(MN), Non-Service Affecting (NSA)

Logical Objects: PEM

The PEM-MODULE-INSERT alarm is raised on the NCS 1002 when the Power Entry Module (PEM) is
inserted into the chassis.

Clear the PEM-MODULE-INSERT Alarm

This alarm clears automatically.

If the condition does not clear, log into the Technical Support Website at

http://www.cisco.com/c/en/us/support/

index.html

for more information or call Cisco TAC (1 800 553-2447).

PEM-MODULE-REMOVAL Alarm

Default Severity: Major (MJ), Service-Affecting (SA)

Logical Objects: PEM

The PEM-MODULE-REMOVAL alarm is raised on the NCS 1002 when one of the redundant PEM module
is removed from the system.

Clear the PEM-MODULE-REMOVAL Alarm

This alarm clears when the redundant PEM module is inserted back into the chassis.

If the alarm does not get cleared, you need to report a Service-Affecting (SA) problem. Log into the Technical
Support Website at

http://www.cisco.com/c/en/us/support/index.html

for more information or log into

http://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html

to obtain a directory of toll-free

Technical Support numbers for your country.

POWER MODULE OUTPUT DISABLED Alarm

Default Severity: Major (MJ), Service-Affecting (SA)

Logical Objects: PEM

Troubleshooting Guide for Cisco NCS 1002, IOS XR Release 6.3.x

Alarm Troubleshooting

Clear the PATCH-PANEL POWER REDUNDANCY LOST Alarm

Содержание NCS 1002























































































Результаты поиска

Содержание NCS 1002

Отзывы:

Похожие инструкции для NCS 1002

Бренды по названию

Популярные бренды

Cisco NCS 1002, Руководство по устранению неисправностей

Результаты поиска

Содержание NCS 1002

Отзывы:

Похожие инструкции для NCS 1002

Бренды по названию

Популярные бренды