Chapter 5 Setting Up Discovery and Device Management
Adding Device Credentials to the WLSE
5-6
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-16778-01
Enter HTTP Port Settings for IOS Access Points
HTTP or HTTPS port settings are required for reports on IOS-based access points;
the port settings are used for the links from reports to access point Web interfaces.
The port you should supply for each device is the port for the access point’s Web
interface.
To enter HTTP or HTTPS port settings, perform the following steps:
Step 1
Select
Devices > Discover > Device Credentials > IOS HTTP/HTTPS Port
Settings
.
Step 2
To add a port:
a.
Enter the IP address or range of IP addresses that use this port number.
b.
Enter the port number.
c.
Click
Save
.
Step 3
Repeat Step 2 to add more IP addresses and ports.
Enter WLCCP Credentials for Wireless Domain Services (WDS)
To configure the WLSE to authenticate with WDS devices, perform the following
steps:
Step 1
Select
Devices > Discover > Device Credentials > WLCCP Credentials
.
Step 2
Enter the Radius User Name and Radius Password.
This is the user name and password that you set for the WLSE on the AAA server.
Step 3
Click
Save
.
