Cisco CiscoWorks WLSE 1130-19, Руководство по установке и настройке

Страница: 82 / 104

Chapter 5 Setting Up Discovery and Device Management
Adding Device Credentials to the WLSE
5-2
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-16778-01
Adding Device Credentials to the WLSE
Note If you are importing devices, instead of discovering them, you may not need to
manually enter credentials. If you are importing devices from a file, the
credentials can be included in the file. If you are importing devices from
CiscoWorks RME, the credentials will be imported.
This section provides procedures for entering the following required device
credentials on the WLSE:
•
For all managed devices, enter SNMP credentials.
• For access points, the following additional credentials are required:
–
For IOS-based access points, enter Telnet or SSH credentials and IOS
HTTP port settings.
– For non-IOS access points, enter HTTP credentials.
•
For radio management, enter WLCCP credentials.
Table 5-1 Quick Reference
Tasks References
1.
Add device credentials to the
WLSE. Adding Device Credentials to the WLSE,
page 5-2
2.
(Optional) Set discovery and
management options. Configuring Discovery Options, page 5-7
3. Discover or import devices. Discovering Devices, page 5-8
4. Manage devices. Managing Devices, page 5-13
5.
Add any AAA servers to be
monitored. Adding AAA Servers to the WLSE,
page 5-14