Chapter 5 Setting Up Discovery and Device Management
Adding Device Credentials to the WLSE
5-4
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-16778-01
Step 4
To delete an entry:
a.
Select the entry in the list of entries. To select a number of entries, use the
Ctrl or Shift key.
b.
Click
Delete
.
Note
The default entry cannot be deleted.
Step 5
Click
Save
to apply your changes.
Enter HTTP Credentials for Non-IOS Access Points
HTTP credentials are required for downloading configuration files to non-IOS
access points and for uploading configuration from such access points. The same
password must be set on each access point. You can enter as many usernames and
passwords as necessary.
To enter HTTP usernames and passwords:
Step 1
Select
Devices > Discover > Device Credentials > HTTP User/Password
.
Step 2
To add a username and password:
a.
Enter the access point IP address or range of IP addresses that will use this
username and password.
b.
Enter the username.
c.
Enter the password.
d.
Click
Save
. The IP address and username are added to the Current Entries
textbox.
Step 3
Repeat step 2 to add credentials for more devices.
