Chapter 3 Setting Up the WLSE
Configuring the WLSE’s Network Information
3-4
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-16778-01
Step 5
Answer the next set of prompts to create a self-signed SSL certificate. This
certificate will allow you to access the WLSE securely, using HTTPS, until you
are able to obtain a certificate from a certificate authority (CA).
describes how to respond to the prompts.
To make changes in the certificate after running setup, see
Configuration After Running Setup, page 3-5
.
The certificate expires after one year. To obtain a permanent, signed certificate,
see the SSL instructions in the online help or in the
User Guide for the
CiscoWorks Wireless LAN Solution Engine, Release 2.11
.
DNS server IP
address:
IP address of DNS server for name/address resolution.
The setup program does not validate the IP address you
enter.
If you are not using DNS, see
before proceeding.
209.165.201.1
Would you like to save
this configuration?
[yes]:
•
Enter
yes
to save the configuration. The
configuration is saved and system reboots.
•
Enter
no
to exit without saving configuration and run
setup program again.
Table 3-2
General Configuration (continued)
Prompt
Response Description
Sample Response
Table 3-3
Self-Signed Certificate Creation
Prompt
Response Description
Sample Response
Country Name
2-character code.
US
State or Province Name
Full name of a state or province.
Snake Desert
Locality Name
City or locality name.
Snake Town
Organization Name
Company name.
Snake Oil, LTD.
Organizational Unit
Unit of the company that is using the WLSE.
Webserver Team
Common Name
Fully qualified domain name (FQDN).
www.snakeoil.com
Email Address
Email address.
