Cisco BEFSR41 Скачать руководство пользователя страница 36

Страница: 36 / 54

3. I am not getting an IP address on the Internet with my Internet connection.

A. Refer to “Problem #2, I want to test my Internet connection” to verify that

you have connectivity.

B. If you need to register the MAC address of your Ethernet adapter with your

ISP, please see “Appendix D: Finding the MAC Address and IP Address for
Your Ethernet Adapter.” If you need to clone the MAC address of your
Ethernet adapter onto the Router, see the MAC Address Clone section of
“Chapter 6: The Router’s Web-based Utility” for details.

C. Make sure you are using the right Internet settings. Contact your ISP to see

if your Internet connection type is DHCP, Static IP Address, or PPPoE
(commonly used by DSL consumers). Please refer to the Basic Setup sec-
tion of “Chapter 6: The Router’s Web-based Utility” for details on Internet
Connection Type settings.

D. Make sure you have the right cable. Check to see if the Internet LED is

solidly lit.

E. Make sure the cable connecting from your cable or DSL modem is con-

nected to the Router’s Internet port. Verify that the Status page of the
Router’s Web-based Utility shows a valid IP address from your ISP.

F. Turn off the computer, Router, and cable/DSL modem. Wait 30 seconds,

and then turn on the Router, cable/DSL modem, and computer. Check the
Status tab of the Router’s Web-based Utility to see if you get an IP address.

4. I am not able to access the Router’s Web-based Utility Setup page.

A. Refer to “Problem #2, I want to test my Internet connection” to verify that

your computer is properly connected to the Router.

B. Refer to “Appendix D: Finding the MAC Address and IP Address for Your

Ethernet Adapter” to verify that your computer has an IP Address, Subnet
Mask, Gateway, and DNS.

C. Set a static IP address on your system; refer to “Problem #1: I need to set a

static IP address.”

D. Refer to “Problem #10: I need to remove the proxy settings or the dial-up

pop-up window (for PPPoE users).”

• Click the

button in the

Internet Protocol (TCP/IP) Properties

win-

dow, and click the

button in the

Local Area Connection Properties

window.

• Restart the computer if asked.

B. Open a command prompt.

• For

Windows 98

and

Millennium

, please click

Start

and

Run

. In the

Open field, type in

command

. Press the

Enter

key or click the

but-

ton.

• For

Windows 2000

and

, please click

Start

and

Run

. In the Open

field, type

cmd

. Press the

Enter

key or click the

button.

C. In the command prompt, type

ping 192.168.1.1

and press the

Enter

key.

• If you get a reply, the computer is communicating with the Router.
• If you do NOT get a reply, please check the cable, and make sure

Obtain

an IP address automatically

is selected in the TCP/IP settings for your

Ethernet adapter.

D. In the command prompt, type

ping

followed by your Internet IP address

and press the

Enter

key. The Internet IP Address can be found in the web

inter-face of the Router. For example, if your Internet IP address is 1.2.3.4,
you would enter

ping 1.2.3.4

and press the

Enter

key.

• If you get a reply, the computer is connected to the Router.
• If you do NOT get a reply, try the ping command from a different com-

puter to verify that your original computer is not the cause of the problem.

E. In the command prompt, type

ping www.yahoo.com

and press the

Enter

key.

• If you get a reply, the computer is connected to the Internet. If you can-

not open a webpage, try the ping command from a different computer to
verify that your original computer is not the cause of the problem.

• If you do NOT get a reply, there may be a problem with the connection.

Try the ping command from a different computer to verify that your orig-
inal computer is not the cause of the problem.

Содержание BEFSR41






















































Результаты поиска

Содержание BEFSR41

Отзывы:

Похожие инструкции для BEFSR41

Бренды по названию

Популярные бренды

Cisco BEFSR41, Руководство пользователя

Результаты поиска

Содержание BEFSR41

Отзывы:

Похожие инструкции для BEFSR41

Бренды по названию

Популярные бренды