Cisco BEFSR41, Руководство пользователя

Страница: 14 / 54

21 20
PPTP
PPTP (shown in Figure 5-8)
is a service used in Europe
only. If you are using a PPTP
connection, check with your
ISP for the necessary setup
information.
A. When finished making
your changes on this tab,
click the
Save Settings
button to save these
changes, or click the
Cancel Changes
button
to undo your changes.
B. Click the
Status
tab, and
then click the
Connect
button.
C. Proceed to step 4.
Heart Beat Signal
Heart Beat Signal (shown in
Figure 5-9) is a service used
in Australia only. If you are
using a Heart Beat Signal
connection, check with your
ISP for the necessary setup
information.
A. When finished making
your changes on this tab,
click the
Save Settings
button to save these
changes, or click the
Cancel Changes
button
to undo your changes.
B. Click the
Status
tab, and then click the
Connect
button.
C. Proceed to step 4.
Figure 5-8
Figure 5-9
PPPoE
If your DSL provider says
that you are connecting
through PPPoE or if you nor-
mally enter a user name and
password to access the
Internet, perform these steps:
A. Select
PPPoE
as the
Internet Connection Type,
as shown in Figure 5-6.
B. Enter the User Name.
C. Enter the Password.
D. When finished making your changes on this tab, click the
Save Settings
button to save these changes, or click the
Cancel Changes
button to undo
your changes.
E. Click the
Status
tab, and then click the
Connect
button.
F. Proceed to step 4.
RAS (for SingTel)
RAS (shown in Figure 5-7) is
a service used in Singapore
only. If you are using a RAS
connection, check with your
ISP for the necessary setup
information.
When you are finished, pro-
ceed to step 4.
Figure 5-6
Figure 5-7