Cisco ASR 907, Руководство по установке оборудования

Страница: 23 / 204

Network timing interfaces support redundancy in a redundant RSP configuration. Network timing interfaces
on a redundant RSP remain in operation while the RSP is in hot standby mode.
RSP Interfaces
The figure below summarizes the interfaces on the RSP module.
Figure 2: RSP Interfaces Summary
Interface Label
1 PPS input timing port 1
1 PPS output timing port 2
10 MHz input timing port 3
10 MHz output timing port 4
GNSS RF IN (SMA Threaded Connector) 5
USB console port 6
USB memory port 7
Ethernet management port 8
BITS timing port 9
Interface Modules
The network interfaces are provided through pluggable interface modules.
The following list describes the various IM port density:
• GE SFP ports—Supports 100/1000 modes
• GE Copper RJ45 ports—Supports 10/100/1000 operation
• 10GE SFP+ or XFP ports—Supports 10G mode in Phase2 IMs
• 10GE port on Phase2 IMs—Supports LAN, WAN, OTU1e/2/2e modes of operation
• 2X40 GE interface module—Supports QSFP mode
• T1/E1 ports with integrated inter-office surge protection—Supports TDM channelized, PWE3 processing
and ATM IMA bundles
Cisco ASR 907 Router Hardware Installation Guide
13
Cisco ASR 907 Router Overview
RSP Interfaces