Cisco 5505 - ASA Firewall Edition Bundle, Руководство по настройке CLI

Страница: 827 / 2164

1-15
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring Twice NAT
Configuring Twice NAT
(continued)
For a PAT pool, you can specify one or more of the
following options:
-- Round robin—The round-robin keyword enables
round-robin address allocation for a PAT pool. Without
round robin, by default all ports for a PAT address will be
allocated before the next PAT address is used. The
round-robin method assigns an address/port from each
PAT address in the pool before returning to use the first
address again, and then the second address, and so on.
-- Extended PAT—The extended keyword enables
extended PAT. Extended PAT uses 65535 ports per
service , as opposed to per IP address, by including the
destination address and port in the translation
information. Normally, the destination port and address
are not considered when creating PAT translations, so
you are limited to 65535 ports per PAT address. For
example, with extended PAT, you can create a translation
of 10.1.1.1:1027 when going to 192.168.1.7:23 as well as
a translation of 10.1.1.1:1027 when going to
192.168.1.7:80.
-- Flat range—The flat keyword enables use of the entire
1024 to 65535 port range when allocating ports. When
choosing the mapped port number for a translation, the
ASA uses the real source port number if it is available.
However, without this option, if the real port is
not
available, by default the mapped ports are chosen from
the same range of ports as the real port number: 1 to 511,
512 to 1023, and 1024 to 65535. To avoid running out of
ports at the low ranges, configure this setting. To use the
entire range of 1 to 65535, also specify the
include-reserve keyword.
(continued)
Command Purpose