VCC-2CXP6M
Rev.905-0186-02
©2019 CIS Corporation. All rights reserved.
23
[CH (Channel)]
Images are processed by 4CH interleave in the camera.
ch1
ch2
ch3
ch4
(0,0) (1,0) (2,0) (3,0)
(0,1) (1,1) (2,1) (3,1)
・・・
・・・
・・・
・・・
・・・
・・・
・・・
・・・
X pixel value shall be calculated by referring pixel values of X1, X2, X3, and X4 as the left
drawing. When X1, X2, X3, and X4 are already registered as defected pixels, X can be
added to be registered, but it cannot be corrected.
□
Defective pixels correction control
This is to select ON/OFF of defective pixels correction processing.
Data at Ex-factory and data registered by users are both controlled at the same time.
AnalogControl
DefectPixelCorrection
On/Off
DefectPixelAdd
(Execute)
DefectPixelAddOffsetY
0~1247
DefectPixelAddOffsetX
0~1631
DefectPixelDelete
(Execute)
□
Defective pixels registered by users
This is to add
the specified X and Y coordinate.
Any preferred pixels can be registered and deleted as defective pixels by specifying coordinate.
・
DefectPixelCorrection: This is to select valid/invalid of defective pixels correction.
・
DefectPixelAddOffsetY: This is to specify Y coordinate
・
DefectPixelAddOffsetX: This is to specify X coordinate
・
Please execute DefectPixelAdd to register the specified coordinate as a defective pixels correction point.
・
Please execute DefectPixelDelete to delete the specified coordinate as a defective pixels correction point.
Defective pixels correction cannot not be valid while binning.
In case the coordinate same as the defective data at ex-factory is specified, it shall be ignored.
Only the added pixels by “Defective pixels detection registered by user” or “Defective pixels added by user” can
be deleted. Data at ex-factory cannot be deleted by this command.
