VCC-2CXP6M
Rev.905-0186-02
©2019 CIS Corporation. All rights reserved.
11
TriggerSyncMode : Trigger sync. mode
LineSync
: H sync. trigger mode (Exposure time is controllable per line)
Fixed/Pulse width trigger shutter mode
Overlapping operation (Exposure while reading out image) is valid.
ClockSync
: CLK sync. trigger mode (Exposure time is controllable per sensor clock)
FAST fixed/FAST pulse width trigger shutter mode
Overlapping operation (Exposure while reading out image) is invalid.
※Please change TriggerSyncMode while there is no trigger input.
※Please set Free run mode (internal sync. mode) after set itself to LineSync mode.
TriggerSelector : Trigger selector
This is to select how to start capturing the image out of following.
AcquisitionStart
: Free run mode [Internal sync. mode]
FrameStart
: External trigger mode
※Please do not change TriggerSelector while grabbing (acquiring image).
TriggerActivation
: Trigger activation
This is to select the external signal format and the polarity out of following.
RisingEdge
: Fixed trigger shutter mode: Rising edge (Timed)
FallingEdge
: Fixed trigger shutter mode: Falling edge (Timed)
LevelHigh
: Pulse width trigger shutter mode: High Active (TriggerWidth)
LevelLow
: Pulse width trigger shutter mode: Low Active (TriggerWidth)
TriggerSource
: Trigger source
This is to select where to input the external trigger.
Software
: TriggerSoftware
LinkTrigger0 : External trigger input from CoaXPress Host Device
Please refer to the product specifications & operational manual of the Host Device (ex. grabber board)
to use for how to generate the trigger.
Line0
: Input the external trigger via 6pins circular connector.
※Software Trigger is valid at Rising Edge.
TriggerSoftware
: Software trigger
A trigger is generated in the camera and capture images for 1 frame when this command is executed.
Please make sure to set TriggerSource to Software.
・
RisingEdge(Timed)
・
FallingEdge(Timed)
TriggerMode
OFF (Free RUN)
ON
(TriggerSelector)
(AcquisitionStart)
(FrameStart)
TriggerSyncMode
TriggerActivation
TriggerSource
= Timeed
ClockSync
LineSync
・
LinkTrigger0
・
Line0
・
TriggerSoftware >Excute
・
LevelHigh(TriggerWidth)
・
LevelLow(TriggerWidth)
