VCC-2CXP6M
Rev.905-0186-02
©2019 CIS Corporation. All rights reserved.
21
□
Frame rate = 1 / (Total line count per frame × Time for 1 line)
Time for 1 line
Video output
format
CXP-3
Mono8
6.36
Mono10
7.81
Mono12
9.21
CXP-6
Mono8
3.18
Mono10
3.91
Mono12
4.61
Link rate
Time for 1H [us]
□
The line numbers at partial scan setting can be set from 8 lines. Only multiple numbers of 8 can be set.
The effective line numbers of the manual shutter setting value at partial scan setting become the maximum (except at
ClkSync trigger).
□
When you switch between Full Frame Scan Mode and Partial Scan Mode or when you change Partial scan settings,
the first one frame right after the changes shall be invalid.
*Especially at fixed trigger shutter mode and pulse width trigger shutter mode, input a dummy Trigger
first, and use the next trigger as an actual video signal.
5.18.
2×2 Binning Mode
□
Since the settings for Horizontal and Vertical are linked, 2x2 binning mode is executed when either is set to 2.
※This cannot be set unless DefectPixelCorrection is OFF. Defective pixels correction shall be invalid at this mode.
※BinningHorizontal and BinningVertical cannot be changed unless RegionSelector is at EffectiveRegion.
□
4 pixels of horizontal and vertical shall be mixed and output as 1 pixel. The sensitivity shall be 4 times higher.
This is fixed to simple addition (Sum).
□
Frame rate can be increased with the field angle at full resolution since the vertical line shall be 1/2.
□
This mode cannot be used with partial scan (ROI) function.
Frame rate at Bining mode [fps]
2x2Bining mode
(Number of pixels)
PixelFormat
Link rate (fps)
CXP6_X1
CXP3_X1
(816x624)
Mono8
796.1
398.0
Mono10
662.3
331.1
Mono12
521.8
260.9
ImageFormatControl
BinningHorizontalMode
Sum
BinningHorizontal
1~2
BinningVerticalMode
Sum
BinningVertical
1~2
816pixel
62
4 L
ine
2 x 2 Binning
