Cirris Signature 1000HN, Руководство пользователя

Страница: 7 / 86

1000HN User’s Guide / page 7
Lets get started!
The Cirris 1000HN cable analyzer is an easy-to-use machine that will allow you to
test cables quickly, and with little fuss. In simple terms, the process of using your
1000HN goes like this:
1. Install an expansion box if you want to use one (see page 10 for details). Once
you have installed the box the first time, you probably won’t have to do this
again.
2. Install connector adapters to match the cables you want to test (see page 9 for
details).
3. Check the test option settings; reset the options if you need to (see page 17 for
details).
4. Either:
• Learn a Sample Cable (a cable you know is built correctly) of the kind
you want to test (see page 23 for details), or...
• Retrieve the wirelist data for the kind of cable you want to test from the
analyzer’s memory (see page 31 for details)
This completes programming the analyzer for testing cables. If you have connected a
Sample Cable to learn it, disconnect it now.
5. Connect the first cable you want to test.
6. Test the cable (see page 27 for details).
7. Record and/or or print the test results (see page 30 for details).
That’s it! We’ll show you how to do each of these steps in this manual.
What your order
should contain
Your order should contain these things in addition to this manual:
• 1000HN main unit, including a wall transformer with cord, to provide
power for the analyzer.
• Hand-held test probe.
• Whatever connector adapters you have ordered (usually shipped in a 3 x
5-inch card file). You may also have ordered an optional tilt stand, or an
optional frame stand. If so, these should be included.
• An expansion box if you have ordered one.
Introduction
to the Cirris
1000HN