Cirris Signature 1000HN, Руководство пользователя

Страница: 15 / 86

1000HN User’s Guide / page 15
serial and a parallel connector. To work with the 1000HN your printer must have a
36-position female ribbon connector similar to the one shown here.
Can I use one printer
with more than one
analyzer?
Yes. To use your printer with more than one analyzer, use a switchbox. To change
which analyzer the printer is receiving information from, simply change the switch
setting on the box.
How do I use a printer
without an on-line/off-
line switch?
If your printer does not happen to have an on-line/off-line switch, you can use either
of two solutions:
• Add a switch by placing a switch in the wire to pin 11 of the Epson/Cen-
tronics printer cable. When pin 11 on either side of the cable is open, the
analyzer will see the printer as being off-line, and will display informa-
tion rather than send it to the printer. When you close the switch so that
pin 11 is closed, information will be sent to the printer.
• If you have a switch box available, you can connect the cable to the
switchbox, and use its switch as the on-line/off-line switch.
Changing the
company name
To change the company name that appears in the documentation produced by the
1000HN, you can order an EPROM change from Cirris Systems. Replace the
EPROM. For details on how to do this, see page 13.