Cirris Signature 1000HN, Руководство пользователя

Страница: 28 / 86

Section 5: Test Your First Cable / Interpreting hipot test results
1000HN User’s Guide / page 28
If a connection is missing:
The display prompts
Open Detected
, and the analyzer emits a series of single
beeps.
If the analyzer detects a short:
The display prompts Short Detected , and the analyzer emits a series of double
beeps.
If both opens and shorts are detected:
The display prompts
Errors Detected
, and the analyzer emits a series of triple
beeps.
If an insulation short is detected:
The display prompts either
Bad R> X
Ω
s or Insulation Short . Both prompts indi-
cate that the measured resistance is higher than the Connection Resistance setting,
and lower than the Insulation Resistance setting. The analyzer emits a series of double
beeps.
Interpreting hipot test
results
If you have set the
AUTO Hipot
option to
ON
, the analyzer will automatically hipot
test each cable after the cable passes the resistance tests. If this option has been set to
OFF
, the analyzer will prompt
Ready to Hipot
, and you will have to press
Function
to begin the hipot test.
Note
: During the test, the analyzer prompts the net being hipot tested and
Hipot
Test.
If you happen to touch any uninsulated part of the cable under test, you may
experience a mild but annoying electrical shock, and cause the hipot test to fail.
OPEN DETECTED
SHORT DETECTED
ERRORS DETECTED
BAD R>.x
Ω
or
INSULATION SHORT