Cirris Signature 1000HN, Руководство пользователя

Страница: 21 / 86

Section 3: What the Option Settings Mean / Error Tones
1000HN User’s Guide / page 21
Function
switch.
When this option is
OFF
, a cable won’t be hipot tested (after passing a resistance test)
until you press the
Function
switch.The
Function
switch becomes a “push-to-test”
switch on the hipot test.
Error Tones When the analyzer detects errors, it emits a series of sharp beeps. This setting allows
you to set the volume of these beeps. The available settings are
Off
,
Low
, and
High
.
Sorted Wire List
When this option is
ON
, it changes the order that errors appear in a net. For example,
pin J1-01 will always come before pin J1-14 if they are connected in the same net.
When this option is
OFF
, the order that pins appear in a net is determined by the
scanning order of the analyzer.
Count All Cables Once the analyzer is programmed, and you’ve begun testing cables, the analyzer
begins to count the cables you test. When this option is
ON
, the printout from your
tests shows the total number of cables tested, as well as the number of cables which
tested as good. When this option is
OFF
, the printout will show only the number of
cables that tested as good.
Auto Print
When a printer is connected to the analyzer and this option is
ON
, the system will
print a one-line report when each cable being tested is disconnected, indicating
whether that cable tested as good, bad, or intermittent. When this option is
OFF
, the
system will not print each result automatically.