manualshive.com logo in svg

Cirris Signature 1000HN, Руководство пользователя

Поделиться
Скачать
Cirris Signature 1000HN Скачать руководство пользователя страница 64

Section 12: Troubleshooting / Problems with Printing

1000HN User’s Guide / page 64

to see if it works.  

5.

The printer may be bad.  Try using another printer, or test your original printer 
and cable with a standard computer.  If the printer does not work with the PC, it is 
probably bad.

6.

If the cable and printer work with a PC, the microprocessor assembly inside the 
analyzer is probably bad.  Call Cirris to replace it.

Problem

: Characters missing in printout.

Possible Causes

:

•  Bad printer cable.
•  Printer cable is too long.
•  Printer is incompatible with the analyzer.
•  Microprocessor assembly inside the analyzer is bad.

Things to do

:

1.

Verify that the printer cable is correctly built. Check for shorts in pin 11.

2.

If the printer cable is more than 10 feet long, you may have printing problems.  
The electrical signals from the printer become too weak to work well as the cable 
gets longer.  Use a shorter printer cable.

3.

Try using the printer cable with a PC.  If it works, the printer probably is not 
compatible with the analyzer.

4.

If the cable and printer work with a PC, the analyzer’s microprocessor assembly 
is probably bad.  Call Cirris to replace it.

Problem

: Wrong characters in printout.

Possible Causes

:

•  Bad printer cable.
•  Bad printer.
•  Printer cable too long.
•  Microprocessor assembly inside the analyzer is bad.

Things to do

:

1.

The printer cable may be bad.  Check for shorts, opens, or miswires on pins 2 
through 9.  Either fix the cable, or replace it with a good cable.

2.

The printer may be bad.  Try using  another printer with the analyzer, or test your 
original printer cable and printer with a PC.  If the printer does not work with a 
PC, the printer is bad.  Replace the printer.  If the printer and cable do work with 
a PC, the analyzer’s microprocessor assembly is probably bad.

3.

The printer cable may be too long.  Your printer cable should not be longer than 
10 feet.  The printer signals get too weak to work properly if the cable is longer 
than 10 feet.

4.

If you have another Cirris 1000HN analyzer available, it is possible to exchange 

Содержание Signature 1000HN























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды