Cirris Signature 1000HN, Руководство пользователя

Страница: 23 / 86

1000HN User’s Guide / page 23
Overview:
In this chapter, we will show you how to learn a Sample Cable, then store the wirelist
from that cable in one of the analyzer’s permanent memory locations.
Memory in the 1000HN The Signature 1000HN has 50 permanent memory locations you can store wirelists
in. You can store wirelists in these locations, retrieve wirelists from them, and delete
wirelists from them. There is also one temporary memory location called “Last
Learned.”
Last Learned
When the analyzer learns a new Sample Cable, the wirelist data from that cable is
stored in the temporary “Last Learned” memory location. It stays there until you
either save it in one of the permanent memory locations, or overwrite it by learning
another Sample Cable.
Learn a Sample Cable Before you can learn a Sample Cable, you must install the right cable adapters on
your 1000HN (see page 9 for instructions on how to do this).
To learn the Sample Cable do these things:
1. Connect the Sample Cable you want to learn to the connector adapters already
installed on the 1000HN. Turn on the analyzer by pressing the
On
switch. The
analyzer will learn the cable, then prompt Please Verify .
2. To verify that the Sample Cable has been learned correctly, press
Display/Print
.
• If you have a printer connected to the analyzer, when you press
Display/
Print
, the analyzer will print out the cable’s wirelist information. The
printout is your cable documentation. Compare the printed information
to the Sample Cable’s specification sheet or build list to be sure the
cable is a good one.
SIG:6BECB9-6F350
PLEASE VERIFY
Turn the analyzer on
Section 4:
Learn a Sample
Cable, Store it
in Memory