Chrysler Pacifica 2021 Скачать руководство пользователя

Страница: 35 / 432

GETTING TO KNOW YOUR VEHICLE

NOTE:

The engine must be running for the heated

steering wheel to operate.

For information on use with the Remote Start

system, see

page 22.

DRIVER MEMORY SETTINGS — IF EQUIPPED

This feature allows the driver to save up to two

different memory profiles for easy recall

through a memory switch. Each memory profile

saves desired position settings for the following

features:



Driver’s seat



Easy Entry/Exit seat operation (on/off) (if

equipped)



Power steering wheel position (if equipped)



Side mirrors (if equipped)



A set of desired radio station presets

NOTE:



Your vehicle is equipped with two key fobs,

each can be linked to either memory position

1 or 2.



If your vehicle is equipped with a Uconnect 5

radio, memory settings will be linked to the

driver profiles in the radio, in addition to

several other features (radio presets, home

screens, settings, navigation, phone, etc)

page 210.

The Driver Memory Settings switch is located on

the driver door, next to the door handle, and

consists of three buttons:



The set (S) button, which is used to activate

the memory save function.



The (1) and (2) buttons which are used to

recall either of two saved memory profiles.

Driver Memory Switch

WARNING!



Persons who are unable to feel pain to the

skin because of advanced age, chronic

illness, diabetes, spinal cord injury, medica

tion, alcohol use, exhaustion, or other phys

ical conditions must exercise care when

using the steering wheel heater. It may

cause burns even at low temperatures,

especially if used for long periods.



Do not place anything on the steering wheel

that insulates against heat, such as a

blanket or steering wheel covers of any type

and material. This may cause the steering

wheel heater to overheat.

1 — Memory Profile Button 1
2 — Memory Profile Button 2
3 — Set Button

21_RUP_OM_EN_USC_t.book Page 33

Содержание Pacifica 2021

















































































































































































































































































































































































































































Результаты поиска

Содержание Pacifica 2021

Отзывы:

Похожие инструкции для Pacifica 2021

Бренды по названию

Популярные бренды

Chrysler Pacifica 2021, Руководство пользователя

Результаты поиска

Содержание Pacifica 2021

Отзывы:

Похожие инструкции для Pacifica 2021

Бренды по названию

Популярные бренды