Chrysler Pacifica 2021 Скачать руководство пользователя

Страница: 110 / 432

108

GETTING TO KNOW YOUR VEHICLE

(Continued)

Stow ‘n Vac Integrated Vacuum — If

Equipped

Your vehicle may be equipped with an

integrated vacuum system. This vacuum is for

in-vehicle use only and should only be used on

dry materials and on in-vehicle surfaces. It is

located in the rear trim panel behind the sliding

door on the driver’s side of the vehicle.
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using. When using

your vacuum, basic precautions should be

followed, including the following:

WARNING!



Never leave children alone in a vehicle, or

with access to an unlocked vehicle.

Allowing children to be in a vehicle unat

tended is dangerous for a number of

reasons. A child or others could be seriously

or fatally injured. Children should be

warned not to touch the parking brake,

brake pedal or the gear selector.



Do not leave the key fob in or near the

vehicle, or in a location accessible to chil

dren, and do not leave the ignition of a

vehicle equipped with Keyless Enter-N-Go

in either ACC mode or engine running (ON)

unless you are using the vacuum system.

Be aware a child could operate power

windows, other controls, or move the

vehicle when the vacuum system is in use.

ALWAYS push ignition button to place igni

tion in the OFF mode when finished using

the vacuum system.

WARNING!

To reduce the risk of fire, serious injury or

death:



Do not use vacuum while

vehicle is in motion or while

driving.



Do not vacuum wet surfaces or any liquids.



Do not use to vacuum up anything outside

of the vehicle.

WARNING!

(Continued)



Do not vacuum any flammable

liquids, such as gasoline, or use

around explosive vapors. Vapors

from flammable liquids may form

an explosive mixture with air and can be

ignited by heat, sparks, or flames. Vapors

may travel to a source of ignition and

explode.



Do not vacuum anything that is burning or

smoking, such as cigarettes, matches, or

hot ashes/embers.



Do not allow to be used as a toy. Close

attention is necessary when used by or

near children.



Do not leave the vacuum running while

unattended.



Use only as described in this manual. Use

only attachments provided with your

vehicle.



Do not put any object into openings. Do not

use with any opening blocked; keep free of

dust, lint, hair, and anything that may

reduce air flow.

WARNING!

(Continued)

21_RUP_OM_EN_USC_t.book Page 108

Содержание Pacifica 2021

















































































































































































































































































































































































































































Результаты поиска

Содержание Pacifica 2021

Отзывы:

Похожие инструкции для Pacifica 2021

Бренды по названию

Популярные бренды

Chrysler Pacifica 2021, Руководство пользователя

Результаты поиска

Содержание Pacifica 2021

Отзывы:

Похожие инструкции для Pacifica 2021

Бренды по названию

Популярные бренды