Chrysler Pacifica 2021 Скачать руководство пользователя

Страница: 345 / 432

IN CASE OF EMERGENCY

343

IF YOUR ENGINE OVERHEATS

If the vehicle is overheating, it will need to be

serviced by an authorized dealer.
In any of the following situations, you can

reduce the potential for overheating by taking

the appropriate action.



On the highway — slow down.



In city traffic — while stopped, place the trans

mission in NEUTRAL (N), but do not increase

engine idle speed.

NOTE:

There are steps that you can take to slow down

an impending overheat condition:



If your Air Conditioner (A/C) is on, turn it off.

The A/C system adds heat to the engine

cooling system and turning the A/C off can

help remove this heat.



You can also turn the temperature control to

maximum heat, the mode control to floor and

the blower control to high. This allows the

heater core to act as a supplement to the

radiator and aids in removing heat from the

engine cooling system.

MANUAL PARK RELEASE

WARNING!



Never have any smoking materials lit in or

near the vehicle when the fuel door is open

or the tank is being filled.



Never add fuel when the engine is running.

This is in violation of most state and federal

fire regulations and may cause the

Malfunction Indicator Light to turn on.



A fire may result if fuel is pumped into a

portable container that is inside of a

vehicle. You could be burned. Always place

fuel containers on the ground while filling.

WARNING!

You or others can be badly burned by hot

engine coolant (antifreeze) or steam from

your radiator. If you see or hear steam coming

from under the hood, do not open the hood

until the radiator has had time to cool. Never

try to open a cooling system pressure cap

when the radiator or coolant bottle is hot.

CAUTION!

Driving with a hot cooling system could

damage your vehicle. If temperature gauge

reads “H”, pull over and stop the vehicle. Idle

the vehicle with the air conditioner turned off

until the pointer drops back into the normal

range. If the pointer remains on the “H”, turn

the engine off immediately, and call for

service.

WARNING!

You should be seated in the driver’s seat with

your foot firmly placed on the brake pedal to

maintain control of the vehicle before

activating the Manual Park Release. If

possible, you should apply the parking brake.

Activating the Manual Park Release will allow

your vehicle to roll away if it is not secured or

properly connected to a tow vehicle.

Activating the Manual Park Release on an

unsecured vehicle could lead to serious injury

or death for those in or around the vehicle.

21_RUP_OM_EN_USC_t.book Page 343

Содержание Pacifica 2021

















































































































































































































































































































































































































































Результаты поиска

Содержание Pacifica 2021

Отзывы:

Похожие инструкции для Pacifica 2021

Бренды по названию

Популярные бренды

Chrysler Pacifica 2021, Руководство пользователя

Результаты поиска

Содержание Pacifica 2021

Отзывы:

Похожие инструкции для Pacifica 2021

Бренды по названию

Популярные бренды