Chrysler Pacifica 2021 Скачать руководство пользователя

Страница: 301 / 432

SAFETY

299

(Continued)

the ground near the engine compartment and

fuel tank before resetting the system and

starting the engine. If there are no fuel leaks or

damage to the vehicle electrical devices (e.g.

headlights) after an accident, reset the system

by following the procedure described below. If

you have any doubt, contact an authorized

dealer.

Enhanced Accident Response System

Reset Procedure

If applicable, refer to the “Hybrid Supplement”

for additional information.
In order to reset the Enhanced Accident

Response System functions after an event, the

ignition switch must be changed from ignition

START or ON/RUN to ignition OFF. Carefully

check the vehicle for fuel leaks in the engine

compartment and on the ground near the

engine compartment and fuel tank before

resetting the system and starting the engine.

After an accident, if the vehicle will not start

after performing the reset procedure, the

vehicle must be towed to an authorized dealer

to be inspected and to have the Enhanced

Accident Response System reset.

Maintaining Your Air Bag System

WARNING!



Modifications to any part of the air bag

system could cause it to fail when you need

it. You could be injured if the air bag system

is not there to protect you. Do not modify

the components or wiring, including adding

any kind of badges or stickers to the

steering wheel hub trim cover or the upper

passenger side of the instrument panel. Do

not modify the front fascia/bumper, vehicle

body structure, or add aftermarket side

steps or running boards.



It is dangerous to try to repair any part of

the air bag system yourself. Be sure to tell

anyone who works on your vehicle that it

has an air bag system.



Do not attempt to modify any part of your

air bag system. The air bag may inflate acci

dentally or may not function properly if

modifications are made. Take your vehicle

to an authorized dealer for any air bag

system service. If your seat, including your

trim cover and cushion, needs to be

serviced in any way (including removal or

loosening/tightening of seat attachment

bolts), take the vehicle to an authorized

dealer. Only manufacturer approved seat

accessories may be used. If it is necessary

to modify the air bag system for persons

with disabilities, contact an authorized

dealer.

WARNING!

(Continued)

21_RUP_OM_EN_USC_t.book Page 299

Содержание Pacifica 2021

















































































































































































































































































































































































































































Результаты поиска

Содержание Pacifica 2021

Отзывы:

Похожие инструкции для Pacifica 2021

Бренды по названию

Популярные бренды

Chrysler Pacifica 2021, Руководство пользователя

Результаты поиска

Содержание Pacifica 2021

Отзывы:

Похожие инструкции для Pacifica 2021

Бренды по названию

Популярные бренды