Chrysler Pacifica 2021 Скачать руководство пользователя

Страница: 370 / 432

368

SERVICING AND MAINTENANCE

Cooling System Pressure Cap

The cap must be fully tightened to prevent loss

of engine coolant (antifreeze), and to ensure

that engine coolant will return to the radiator

from the coolant expansion bottle/recovery

tank (if equipped).
The cap should be inspected and cleaned if

there is any accumulation of foreign material on

the sealing surfaces.

Disposal Of Used Coolant

Used ethylene glycol-based coolant (antifreeze)

is a regulated substance requiring proper

disposal. Check with your local authorities to

determine the disposal rules for your

community. To prevent ingestion by animals or

children, do not store ethylene glycol-based

coolant in open containers or allow it to remain

in puddles on the ground. If ingested by a child

or pet, seek emergency assistance

immediately. Clean up any ground spills

immediately.

Coolant Level

The coolant expansion bottle provides a quick

visual method for determining that the coolant

level is adequate. With the engine off and cold,

the level of the coolant (antifreeze) in the bottle

should be between the “MAX” and “MIN” lines

marked on the bottle.
As long as the engine operating temperature is

satisfactory, the coolant bottle need only be

checked once a month.

When additional coolant is needed to maintain

the proper level, it should be added to the

coolant bottle. Do not overfill.
See an authorized dealer for service.

Cooling System Notes

NOTE:

When the vehicle is stopped after a few miles/

kilometers of operation, you may observe vapor

coming from the front of the engine compart

ment. This is normally a result of moisture from

rain, snow, or high humidity accumulating on

the radiator and being vaporized when the ther

mostat opens, allowing hot engine coolant (anti

freeze) to enter the radiator.

If an examination of your engine compartment

shows no evidence of radiator or hose leaks,

the vehicle may be safely driven. The vapor will

soon dissipate.



Do not overfill the coolant expansion bottle.



Check the coolant freeze point in the radiator

and in the coolant expansion bottle. If engine

coolant needs to be added, the contents of

the coolant expansion bottle must also be

protected against freezing.

WARNING!



Do not open hot engine cooling system.

Never add engine coolant (antifreeze) when

the engine is overheated. Do not loosen or

remove the cap to cool an overheated

engine. Heat causes pressure to build-up in

the cooling system. To prevent scalding or

injury, do not remove the pressure cap

while the system is hot or under pressure.



Do not use a pressure cap other than the

one specified for your vehicle. Personal

injury or engine damage may result.

21_RUP_OM_EN_USC_t.book Page 368

Содержание Pacifica 2021

















































































































































































































































































































































































































































Результаты поиска

Содержание Pacifica 2021

Отзывы:

Похожие инструкции для Pacifica 2021

Бренды по названию

Популярные бренды

Chrysler Pacifica 2021, Руководство пользователя

Результаты поиска

Содержание Pacifica 2021

Отзывы:

Похожие инструкции для Pacifica 2021

Бренды по названию

Популярные бренды