Chrysler Pacifica 2021 Скачать руководство пользователя

Страница: 109 / 432

GETTING TO KNOW YOUR VEHICLE

107



The power liftgate will release, but not power

open, in temperatures below −12°F

(−24°C). Be sure to remove any buildup of

snow or ice from the liftgate before opening

the liftgate.



If the liftgate is left open for an extended

period of time, the liftgate may need to be

closed manually to reset power liftgate func

tionality.

Gas props support the liftgate in the open

position. However, because the gas pressure

drops with temperature, it may be necessary to

assist the props when opening the liftgate in

cold weather.

NOTE:

Allow the power system to open the liftgate.

Manually pushing or pulling the liftgate may

activate the liftgate obstacle detection feature

and stop the power operation or reverse its

direction.

ARGO

REA

EATURES

Cargo Area Storage

When the third row seats are not in the stowed

position, there is a large area for cargo storage.

Rear Cargo Area

NOTE:

With all rear seats stowed or removed, 4 x 8 ft

(1.2 x 2.4 m) sheets of building material will fit

on the vehicle floor with the liftgate closed. The

front seats must be moved slightly forward of

the rearmost position.

WARNING!



Driving with the liftgate open can allow

poisonous exhaust gases into your vehicle.

You and your passengers could be injured

by these fumes. Keep the liftgate closed

when you are operating the vehicle.



If you are required to drive with the liftgate

open, make sure that all windows are

closed, and the climate control blower

switch is set at high speed. Do not use the

recirculation mode.

WARNING!

During power operation, personal injury or

cargo damage may occur. Ensure the liftgate

travel path is clear. Make sure the liftgate is

closed and latched before driving away.

21_RUP_OM_EN_USC_t.book Page 107

Содержание Pacifica 2021

















































































































































































































































































































































































































































Результаты поиска

Содержание Pacifica 2021

Отзывы:

Похожие инструкции для Pacifica 2021

Бренды по названию

Популярные бренды

Chrysler Pacifica 2021, Руководство пользователя

Результаты поиска

Содержание Pacifica 2021

Отзывы:

Похожие инструкции для Pacifica 2021

Бренды по названию

Популярные бренды