Chroma 63200A Series, Инструкция по эксплуатации и программированию

Страница: 95 / 141

High Power Electronic Load 63200A Series Operation & Programming Manual
4-32
OPP:STAR MAX Set start power = maximum value.
OPP:STAR MIN Set start power = minimum value.
Query Syntax: [ADVance:]OPP:STARt?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Watt]
Query Example: OPP:STAR?
OPP:STAR? MAX
OPP:STAR? MIN
[ADVance:]OPP:END
Type: Channel-Specific
Description: Set end power for OPP test mode.
Setting Syntax: [ADVance:]OPP:END<space><NRf+>[suffix]
Setting Parameters:Refer to respective specification for valid value range.
Setting Example: OPP:END 100
Set end power = 100W.
OPP:END 500mW Set end power = 0.5W.
OPP:END MAX Set end power = maximum value.
OPP:END MIN Set end power = minimum value.
Query Syntax: [ADVance:]OPP:END?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Watt]
Query Example: OPP:END?
OPP:END? MAX
OPP:END? MIN
[ADVance:]OPP:STEP
Type: Channel-Specific
Description: Set step count for OPP test mode.
Setting Syntax: [ADVance:]OPP:STEP<space><NRf+>
Setting Parameters:<NRf+>, 1 ~ 1000, Resolution = 1, Unit = None
Setting Example: OPP:STEP 500
Set step count = 500.
OPP:STEP MAX Set step count = maximum value.
OPP:STEP MIN Set step count = minimum value.
Query Syntax: [ADVance:]OPP:STEP?[<space><MAX | MIN>]
Return Parameters:<NR1>, [Unit = None]
Query Example: OPP:STEP?
OPP:STEP? MAX
OPP:STEP? MIN
[ADVance:]OPP:DWELl
Type: Channel-Specific
Description: Set dwell time for OPP test mode.
Setting Syntax: [ADVance:]OPP:DWELl<space><NRf+>[suffix]
Setting Parameters:<NRf+>, 10μs ~ 1s Resolution = 10μs, Unit = Second
Setting Example: OPP:DWEL 0.5
Set off time = 0.5s.
OPP:DWEL 500ms Set off time = 0.5s.
OPP:DWEL MAX Set off time = maximum value.
OPP:DWEL MIN Set off time = minimum value.
Query Syntax: [ADVance:]OPP:DWELl?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Second]
Query Example: OPP:DWEL?
OPP:DWEL? MAX
OPP:DWEL? MIN