Chroma 63200A Series, Инструкция по эксплуатации и программированию

Страница: 131 / 141

High Power Electronic Load 63200A Series Operation & Programming Manual
5-4
Channel Summary 5.2.2
■
The Channel Summary registers summarize the channel status conditions up to 10
channels.
■
When an enabled bit in the Channel Status Event register is set, it causes the
corresponding channel bit in the Channel Summary Event register to be set.
■
Reading the Event register will reset it to zero.
■
The Channel Summary Enable register can be programmed to specify the channel
summary event bit from the existing channels that is logically ORed to become Bit 2
(CSUM bit) in the Status Byte register.
Questionable Status 5.2.3
■
The Questionable Status registers inform you one or more questionable status
conditions which indicate certain errors or faults have occurred to at least one channel.
Table 5-2 lists the questionable status conditions that are applied to the electronic load.
These conditions are same as the channel status conditions. Refer to Table 5-1 for a
complete description.
■
When a corresponding bit of Questionable Status Condition register is set, it indicates
the condition is true.
■
Program the PTR/NTR filter to select the way of condition transition in the Questionable
Status Condition register that will be set in the Event registers.
■
Reading the Questionable Status Event register will reset it to zero.
■
The Questionable status Enable register can be programmed to specify the
questionable status event bit that is logically ORed to become Bit 3 (QUES bit) in the
Status Byte register.
Table 5-2 Bit Description of Questionable Status
Mnemonic Bit Value Meaning
TE/OT
0 1 Temperature Error (Over temperature) .
OV 1 2 Over voltage .
CE/OC 2 4 Current Error (Over current) .
PE/OP 3 8 Power Error (Over power) .
RV 4 16 Reverse voltage on input .
SYNC 5 32 Synchronize timeout.
MAX LIM 6 64 Maximum sine wave current limit
FAN 7 128 FAN fail.
REMOTE
INHIBIT
8 256 Remote inhibit
Output Queue 5.2.4
■
The Output Queue stores output messages until they are read from the electronic load.
■
The Output Queue stores messages sequentially on a FIFO (First-In, First-Out) basis.
■
It sets to 4 (MAV bit) in the Status Byte register when there are data in the queue.