INST.No.INE-378-P9CE
- 35 -
6.5.9-3 Temperature scaling for automatic emissivity calculation
This mode is for the scaling of the temperature value when the automatic emissivity calculation is selected.
1) To program the minimum temperature value for the scaling,
press
SEL
key in the engineering mode screen until “
AinL
”
appears in the sub display as shown in the right figure.
2) By pressing
key, the most significant digit of the main
display will blink.
3) Use
△
or
▽
key to program the desired value.
4) To shift to the next lower digit, press
key.
The next lower digit will blink.
5) Repeat the above procedure of (3) and (4) up to the least
significant digit for programming (4 digits).
6) To activate this programming, press
ENT
key.
7) To program the maximum temperature value for the scaling,
press
SEL
key in the engineering mode screen until “
AinH
”
appears in the sub display as shown in the right figure.
8) Repeat the above procedure from (2) to (6) .
• The programmable range is
0
to
6280ºC
.
• The defaults are:
AinL
(Minimum value) : Minimum value of the measuring range
AinH
(Maximum value) : Maximum value of the measuring range
Remarks
[Minimum value of
temperature scaling]
Tb
CONT
MEM
PEAK
AL
AH
C
F
ε
Main display
Sub display
[Maximum value of
temperature scaling]
AL
AH
C
F
ε
Tb
CONT
MEM
PEAK
Main display
Sub display
