INST.No.INE-378-P9CE
- 9 -
4.1.3 Installation/removal
4.1.3-1 Installation
1) Fix a DIN rail or the mounting plate on the wall.
(Fix the mounting plate with the protruding part upward.)
2) Pull the DIN rail stopper downward.
3) Hook the
○
A of the thermometer to the upper side of
the DIN rail, and push the thermometer toward to
○
B .
4) Raise the DIN rail stopper upward with minus driver to
complete the installation of the thermometer.
4.1.3-2 Removal
1) Remove the thermometer by pulling the DIN rail stopper
downward with plugging the minus driver into the
○
C .
DIN rail stopper
Ｃ
DIN rail (35mm width)
or mounting plate
DIN rail stopper
Ｂ
Ａ
Thermometer
Wall etc
Protruding part
(For mounting plate)
Don’t use the thermometer in the following places.
1) Dusty place or a corrosive gas atmosphere.
2) Places where noisy and static electric are existed.
3) Places where the ambient temperature is higher than 50°C or lower than 0°C.
4) Places where the ambient temperature changes abruptly, or high humid places.
5) Places where an inductive oscillator or electric power line are existed near side.
6) Places where there are mechanical vibrations and impacts.
7) Places where combustible or volatile gas is existed.
Caution
