Chino AH4000, Инструкция по эксплуатации

Страница: 5 / 131

- 2 -

Before use
Make sure to check the following before use after unpacking the unit. If you have any question, please contact your dealer
or our nearest office.
1. Exterior check
Check that the appearance of the product has no damage.
2. Model code check
Check that the model code of the purchased product is correct.

Model code label and application place
The label as follows is attached on the upper surface of the product case and the chassis.
A H 4 7

P-

-

← Model code
R *

← Serial number
M A D E I N J A P A N
3. Accessories check
Check the following accessories attached to the product.
Item Q'ty Remarks
Instruction manual 1 CD-R
Instruction manual [Wiring/Installation] 1 Booklet
Bracket 2 (1 set) For panel mounting, CG1-31039
Fixing screw 2 For panel mounting, CG1-21062
Open-end Wrench 1 CG1-31072
Terminal screw 5 M3.5, for input terminal (spares for missing)
Chart paper 1 The type depends on the specifications.
Cartridge pen (Analog pen) 1 each
Red (1
st
pen), Green (2
nd
pen)
Blue (3
rd
pen), Brown (4
th
pen)
Plotter pen (Digital pen) 1 Purple
In addition, if accessories are purchased additionally, those products may be attached.
1. Do not drop the product while take it out of the box
2. When transporting the unit, pack in the dedicated package box, and put the box in an outer case with a bed of
cushion.
With the consideration to the case above, it is recommended that the dedicated package box for the unit is
stored.
3. When the unit is removed from the panel and not used for a long time, put it in the dedicated package box, and
store it in a place with normal ambient temperature and less dust.
Request