- 117 -
13-2. Operation Recording Settings “Ope.Rec”
The ON/OFF status of the remote contact input (No. 1 to 10:
depending on the specification) can be recorded to chart.
For a target remote contact No., specify the recording position for
input OFF status (percentage value of chart span) and the
recording position for input ON status by an offset (1 to 10mm)
from the OFF position.
When the input is ON, recording is made on the right side of the
input OFF recording position, at the position specified by an
arbitrary offset width.
At this time, a straight line connects between ON and OFF.
(1) Pressing
the
key displays the
menu window (list of setting items).
(2) Select
“Ope.Rec”.
(3) Move the cursor to the target remote
contact No. with the
▲
/
▼
keys and press
the
key. The cursor does not move
to parameters other than EX.
Also,
pressing
the
key on this
window displays the copy window for
operation recording settings.
(4) Move the cursor to the parameter to be set
with the
▲
/
▼
/
/
keys.
(5) Press
the
key to make it available
for setting and then select or enter a value.
(6) After completing the settings of this item,
move the cursor to Set .
(7) Press
the
key to register the
settings (when chart recording is ON, a
setting change mark is printed). To cancel
the settings, press the
key.
[List of Ope.Rec setting parameters]
Parameter
Function
Default
Set value
ON/OFF
Select ON or OFF for operation recording
OFF
ON (enabled), OFF (disabled)
Position
Set recording position for input OFF status to
percentage of chart zero span
*
0 to 90 (%)
Width
Set recording position for input ON status to
millimeters of chart zero span based on the
input OFF recording position.
*
1 to10 [mm]
Operation recording line and remote
contact No.
Setting range
#1
#2
Remote contact No.
Lines recorded when
open
Lines recorded when
short
Specify
width
0 90(%)
Specify
width
