- 76 -
8-15. Recording Format Settings “PrtForm”
Set the format for trace printing depending on the intended use.
This function is provided to select the format used for trace printing. Input range and its accuracy are determined by the
settings made in “8-2. Input Type Settings”.
The recording format cannot be set for each individual channel. Select one from the following options which is shared by
all channels. However, when selecting the automatic range-shift or compressed/expanded printing, whether or not to use
the function can be specified for each channel. A channel specified not to use the function will use the standard format.
Automatic
range-shift
····················· Recording range is shifted automatically depending on the input range.
Compressed/expanded printing ······· Chart recording area can be partially shrunk or expanded.
Zone printing ······························· Chart recording area can be divided into four areas at maximum.
(1) Pressing
the
key displays the
menu window (list of setting items).
(2) Select
“PrtForm”.
(3) Press
the
key to make it available
for setting and then select a value.
(4) After completing the setting of this item,
move the cursor to Set .
(5) Press
the
key to register the
setting (when chart recording is ON, a
setting change mark is printed). To cancel
the setting, press the
key.
[PrtForm setting parameter]
Parameter
Function
Default
Set value
Printing Format
Select recording format
Standard
Standard,
Auto Range Normal (automatic range-shift normal),
Auto Range Overlap (automatic range-shift overlap),
Comp.&Exp.Print (compressed/expanded printing),
Zone Print (parallel scale)
