- 116 -
3. Parameter settings
(1) Pressing
the
key displays the
menu window (list of setting items).
(2) Select “Dig Inp”.
(3) Move the cursor to the target remote
contact No. with the
▲
/
▼
keys and press
the
key. The cursor does not move
to parameters other than No.
(4) Press
the
key to make it available
for setting and then select a value.
(5) After
completing
the setting, move the
cursor to Set .
(6) Press
the
key to register the
setting (when chart recording is ON, a
setting change mark is printed). To cancel
the setting, press the
key.
[Dig Inp setting parameter]
Parameter
Function
Default
Set value
Mode
Allocate
function to
specified
remote contact
terminal No.
None
None (not used), ChartSpeed (chart speed), Message 1,2 (message 1 & 2
printing), Message 1to5 (message 1 to 5 printing),
DataPrint, ListPrint 1 (list 1 printing), ListPrint 2 (list 2 printing), ListPrint 3
(list 3 printing), INT-Reset(All) (integration reset), Clock Adj (time
correction), Message 1 (message 1 printing) to Message 20 (message 20
printing)
