Chicago Dryer King Edge VAc, Инструкция по эксплуатации

Страница: 44 / 302

Operating Guidelines King Edge Vac
3-4
3.2 Operating Controls
All operating controls are externally mounted
on the endframes and most are clearly marked
with nameplates.
References to these functions are capitalized
in this instruction manual for easy identification.
Detailed descriptions are given in the following
paragraphs.
Most of these controls are located at the front
of the machine (Figure 3-6). With the exception
of the CHI Panel, there are duplicate controls at
each operator station:
Start/Stop buttons (A)
Safety STOP buttons (B)
STAIN REJECT (Option) button (C)
TEAR REJECT (Option) button (D)
Integrated Stop Circuit (Option)
indicator lights (E)
CHI Panel (F)
Pacing Lights (Option) (G)
•
•
•
•
•
•
•
Figure 3-6: Controls located at the front of the unit.
A
B
D
C
B
F
E
G
START/STOP button (A):
Initiate and pause general machine operation.
Each station has a set. The green Start button
starts all moving parts while the square red Stop
button pauses operation of the unit.
During normal operation, the integrated lamp
glows steadily when the unit is running. The lamp
flashes when either a square red station STOP
button or a red safety STOP button is pressed.
Safety STOP button (B):
Provided to help assure operator safety and
to prevent damage to the unit. There are six
of these red safety STOP buttons, one at each
operator station and one on each endframe, front
and rear.
When pressed, these stop all moving parts,
release internal air pressure, and lock out
operation of the unit.
A red safety STOP button stays pressed down
until manually reset by twisting.
Before restarting the unit, correct the problem
that resulted in the red safety STOP button being
pressed.
TOC INDEX