18
Mobile 2 RPW User Manual
3. Operation
3.6 INFO MENU
The Info menu enables you to reset the handpiece counter, to call up the total shock count and instrument operating hours as well
as to read out data on monitoring software, hardware serial numbers and modification status.
•
To activate the Info menu, press both arrow keys simultaneously and hold them for two seconds.
The display changes to Info mode: The top line (nominal energy display) shows the menu item in question as a number between 1
and 10. (Fig. 3 - 2/1), whereas the middle line (Fig. 3 - 2/2) shows the called-up information (in this case: hardware article no.).
Fig. 3 - 2 Info mode
•
Use the dial to move up or down in the menu in order to call up the following data:
Menu Item
Display
1
Handpiece pulse counter
2
Total pulse counter
3
Operating hours counter
4
Hardware article no.
5
Hardware change index
6
Not used
7
Software article no.
8
Software change index
9
Boot loader article no.
10
Not used
NOTE
Shock counter displays 1 and 2 display the shock count in steps of one thousand.
• To exit the Info menu, press both arrow keys simultaneously and hold them for two seconds.
3.7 RESETTING THE HANDPIECE SHOCK COUNTER
•
Switch to Info mode (see chapter 3.6 INFO MENU).
•
Select menu item 1 - Handpiece counter.
The number of shocks is displayed in steps of one thousand. The value displayed in the middle line multiplied by 1,000 gives the
counter reading for the current handpiece.
•
Press the reset button to set the handpiece counter to zero.
2
1
