3D ActiveTrac
®
13
iNSTALLATiON
1. Remove packaging materials.
2. Attach the Touchscreen
Control Panel (TCP) to the
cervical end of the table
using the four, 1/4” x 1”
buttonhead, socket head cap
screws using a 5/32 hex-key
(Figure 1)
.
3. The power control box is
located at the cervical end of
the table. Attach the TCP 15
pin connector to the cervical
end of the power control box
and hand tighten mounting
screws
(Figure 2)
.
4. Plug the hospital grade
power cord into the power
receptacle
(Figure 2)
.
5. Plug the hospital grade
power cord into an
appropriate 3-prong electrical
outlet conforming to the
applicable national and local
electrical codes.
FIGURE 1
FIGURE 2
ON/OFF
SWITCH
15 PIN
CONNECTOR
POWER
CORD
POWER
RECEPTACLE
