manualshive.com logo in svg

Chattanooga Group Intelect TRANSPORT Vectra Genisys 2759, Руководство по обслуживанию

Поделиться
Скачать
Chattanooga Group Intelect TRANSPORT Vectra Genisys 2759 Скачать руководство пользователя страница 8

Intelect TranSport®/Vectra Genisys® Ultrasound Therapy Systems

6

3 NOMENCLATURE

 

The symbols below are found on the system as 

 

well as within the software. These symbols are 

 

defined for the purpose of recognition and 

 

functionality when operating or performing 

 

service on the Intelect Transport/Vectra Genisys 

Ultrasound Therapy Systems.
Know the symbols and their definitions before 
performing any operation of or service to the 
Intelect Transport/Vectra Genisys Ultrasound Therapy 
Systems.

Intelect Transport/Vectra Genisys Ultrasound Therapy Systems Hardware Symbols

3.2 HARDWARE AND SOFTWARE SYMBOL DEFINITIONS

Power On/Off

 

The Power On/Off button controls the flow of electricity to the unit. Illuminates steady when system

 

is On. Flashes when power is available.

LCD

 

The LCD (Liquid Crystal Display) allows the user to view and monitor the information displayed before, 

 

during, and after therapy.

Clinical Library

 

Select this button to access the following functions:

Retrieve User Protocol

Restore Factory Settings
Restore Factory Protocols
Languages
View Unit Information

Time

 

Press the Up or Down arrow buttons to set total treatment time of therapy.

Back

 

Use this button to return to the previous window.

STOP

 

Select this button to stop a treatment session.

Down Arrow

 

When the window displays a list of options, press the Down Arrow button to scroll down the list.

Pause

 

Press this button to pause and restart therapy sessions. 

Sound Head

 

The aluminum face of the applicator that contacts the patient’s skin. It covers a transducer mechanism 

 

that converts electrical energy to mechanical energy in the form of a vibrating crystal.

LED Indicator (Output Power)

 

When illuminated, this green light signifies that ultrasound energy is being emitted from the  

 Sound 

Head. 

Applicator

 

The hand held assembly used to deliver ultrasonic energy. The Applicator includes the Sound Head, 

 

Transducer, and related electronics.

•

•
•
•
•

Содержание Intelect TRANSPORT Vectra Genisys 2759

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды