ChargePoint® Charging Stations
2-2
Step 2: Install Pedestal Covers
•
Position the two-piece pedestal covers over the
bottom of the pedestal, as shown.
•
Insert the two 8-32 x 3/8” screws into each side
of the pedestal, as shown.
•
Tighten the screws using a Phillips screwdriver.
NOTE:
As illustrated, the cover you use at the back
of the pedestal depends on whether your station
includes a Cord Management Kit (CMK). Discard the
extra cover.
If using a cord management kit, use the back pedestal cover
with the indentation:
If not using a cord management kit, use the back pedestal
cover without the indentation:
8-32 x 3/8”
screws (4)
8-32 x 3/8”
screws (4)
