3-1
Install Bracket and CMK
3
Preparation (stations without Cord Management)
Slide the spacer at the back of the pedestal upward to remove. Discard the spacer
(this spacer is required only if you are installing a cord management kit).
IMPORTANT !
This section describes how to attach the mounting bracket and its associated components to the pedestal.
Follow the steps associated with the particular CPF25 model you are installing:
Single Station (no Cord Management) - see page 3-3
Single Station with Cord Management - see page 3-5
Dual Station (no Cord Management) - see page 3-7
Dual Station with Cord Management - see page 3-10
Before proceeding with the installation, follow one of the preparation steps below. The preparation step is
different depending on whether your CPF25 includes the Cord Management option.