ChargePoint® Charging Stations
D-2
Installing a Top Sign on the Cord Management Kit (CMK)
To remove a sign after the station has been installed:
1.
Use the L-wrench to loosen the set screw on each side of the
top cap, as shown.
2.
Pull the top assembly up and move it towards the back of the
cord management assembly.
3.
Slide the existing sign out of the grooves.
To install the new sign:
1.
Slide the replacement sign into the grooves by bending is
slightly.
2.
Slide the sign all the way down, ensuring its bottom edge is
located behind the plastic cap on the cord management
assembly, as shown.
3.
Re-install the top assembly. Remember to tighten the set
screws.
Installing a Rear Sign on a Cord
Management Kit (CMK)
Installing a sign on the rear side of the cord management
assembly is the same as the instructions provided above for
installing a bottom sign on a wall mounted cord management
assembly.
Custom and Optional Signs
Detailed sign specifications for custom and optional signs are
available at www.chargepoint.com/support-guides.php.
Sample Sign Dimensions
Top Sign on Front of CMK
