Residual danger
Safety
CEDIMA • Technical Documentation • CF • 4030 Joint Cutter • 194030001 – xx4030xx • Issue Date 17.03.2022
33
Residual dangers on machine and countermeasures (cont.)
Danger
Cause
Measure
Dangers from hazardous
substances | inhalation of
dust, eye contact with dust.
Inhalation of large
quantities of dust can cause
damage to the lungs and
airways. There is a risk of
breathing difficulties.
In addition, the dust can
also settle in the eyes,
which can have a negative
effect on vision and cause
an infection.
When the machine is
used as intended, dust
is generated by the cut
material, even when it
is wet.
Always wear suitable personal
protective equipment:
•
Light breathing protection
•
Safety goggles
Mechanical hazards
| Controlled moving
unprotected parts in case
of human error:
If the operator does
not protect the diamond
saw blade with the blade
guard, the diamond saw
blade is not protected.
There is a danger of cutting.
The diamond saw blade
is secured by the blade
guard. To operate the
machine, the blade guard
must be closed manually.
The machine may only be
operated when the diamond
saw blade is secured.
Before starting the engine, check
that the blade guard is in closed
position above the diamond saw
blade.
Hazards due to fire and
explosion | Danger from
flammable liquid fuel: If the
fuel comes into contact
with glowing parts or open
fire, there is a risk of the fuel
igniting.
The engine runs on fuel.
When refuelling, naked flames or
smoking is prohibited in the area
of the machine.
Use a suitable filler neck when
refuelling.
Remove spilled fuel immediately
according to the manufacturer‘s
instructions.
