Residual danger
Safety
CEDIMA • Technical Documentation • CF • 4030 Joint Cutter • 194030001 – xx4030xx • Issue Date 17.03.2022
32
Residual dangers on machine and countermeasures (cont.)
Danger
Cause
Measure
Exposure to specific
physical effects | noise:
Due to noise emissions,
there is a danger of
hearing damage, reduced
concentration and
equilibrium disturbances
during operation.
The measured sound
pressure level (on the
operator side) is approx.
103 dB(A) at the peak.
Always wear suitable personal
protective equipment:
•
Hearing protection
Hazards due to special
physical effects | hand-arm
vibrations:
Hand-arm vibrations can
endanger health and safety
and impair performance
and well-being if the
vibrations are strong or the
exposure is of excessive
duration, frequency and
regularity.
The measured vibration
exposure (at the steering
wheel) is 14.2 m/s²
(average value).
Operate the machine according
to the operator‘s time
management.
