Residual danger
Safety
CEDIMA • Technical Documentation • CF • 4030 Joint Cutter • 194030001 – xx4030xx • Issue Date 17.03.2022
34
Residual dangers on machine and countermeasures (cont.)
Danger
Cause
Measure
Hazards due to human
error:
If the machine is operated,
cleaned or serviced
before the operating
instructions have been
read and understood, there
are dangers for persons,
the machine and the
environment.
Special instructions
must be observed for
operation, cleaning and
maintenance of the
machine.
Read the original operating
manual carefully before
commissioning.
Operate the machine exclusively
in accordance with the
information in the original
operating manual.
Mechanical hazards |
Uncontrolled moving parts
in case of human error:
If the visor is not properly
secured, there is a risk of
injury due to unchecked
falling of the visor.
The visor can be pivoted.
The visor is in the
lower position during
operation. In all other
phases of life, the visor is
in the upper position. In
the upper position, the
visor must be secured
against swinging down.
Secure the visor in the upper
position by fixing the visor strap
in the visor strap holder.
Mechanical hazards |
pointed parts of the
machine:
If the machine is moved
with the visor raised and
the visor tips turned
outwards, there is a risk of
stabbing and impact.
Metallic visor tips are
mounted on the visor for
setting up the visor. When
setting up the visor, the
visor tips are pulled out
and turned outwards if
necessary.
After operating the machine turn
the visor tips so as to align them
parallel to the visor and lock
them in place.
Thermal hazards | Hot
surface:
There is a risk of burns on
skin contact.
Due to the process, the
surfaces in the area of the
motor and the diamond
saw blade heat up.
Use your personal protective
equipment when working in the
area of hot surfaces:
•
Safety gloves
